This article will teach you how to prevent damage to your laptop from water immediately after spilling liquid on it. Please note that although the following information is the best way to deal with a spill yourself, it cannot be guaranteed that your laptop will be stored safely; similarly, a far better solution is to seek professional help.
Short summary:
Remove the notebook from the liquid.
Disconnect the external device.
Wipe off any remaining liquid.
Remove all the material you can.
Allow drying for at least 24 hours before switching it on.
Steps
To do this, just hold down the laptop’s power button.
To disconnect the laptop from the power source, simply remove the charging cable from the laptop.
This minimizes exposure of the notebook to large amounts of liquid and reduces the risk of electric shock.
You can usually do this by turning the laptop over, sliding the panel out from the bottom of the laptop, and gently pulling on the battery.
1. Disconnect all external hardware
This includes the following items:
Memory cards
Drivers (eg mouse)
Laptop charger
2. Put a towel on a flat surface
This is where you’ll be configuring your laptop for the next few days, so choose a warm, dry, inconspicuous spot.
Depending on the flexibility of your laptop, anything from a tent laptop to a completely flat laptop will be possible. If you want to speed up the liquid drying process, you can get a quick-fix liquid to help you.
3. Before touching the internal parts of the computer, ground yourself
Grounding eliminates static electricity from your clothing or your body. Static electricity can easily destroy the circuit, so it’s important to do this step before touching the RAM card or hard drive.
If you’re not familiar with removing your computer’s RAM, hard drive, and other internal removable components, you should bring your laptop to a professional service center instead.
You cannot find anything else for your particular material. Just search for your computer’s make and model number, followed by “RAM Removal” (or the component you want to remove).
4. Dry all wet internal parts
You’ll need a microfiber cloth (or other lint-free cloth) for this.
If there is too much water in your laptop, you need to empty it first. Be extremely sweet.
5. Remove dried residue
Using a lint-free cloth, gently remove any non-water stains, chips, and another non-liquid residue.
6. Let the notebook dry
Do not forget to store the notebook in a dry and warm place.
Never use a hair dryer to speed up the drying process of your laptop, as the heat concentration of the hair dryer is strong enough to damage the internal parts of your laptop.
If it won’t start or if you experience sound or display distortion, you need to have your laptop serviced by a professional laptop repair service (such as Best Buy Service).
7. If necessary, remove any residue
Even when your laptop is in use, you may have to deal with a sticky or greasy substance. You can remove this dirt by gently rubbing the affected area with a damp, lint-free cloth like when the laptop is dry.
